Version update to full release

dev-embedded/u-boot-pinephone-pro/u-boot-pinephone-pro-2022.07.ebuild

@@ -0,0 +1,118 @@
+# Copyright 1999-2022 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=8
+
+inherit toolchain-funcs
+
+PKGREL="4"
+FIRMWAREVERSION="2.7.0"
+COMMMIT="e092e3250270a1016c877da7bdd9384f14b1321e"
+MY_P="u-boot-${COMMMIT}"
+DESCRIPTION="Das U-boot and utilities for working with Das U-Boot for the PinePhone Pro"
+HOMEPAGE="https://www.denx.de/wiki/U-Boot/WebHome"
+SRC_URI="
+	https://source.denx.de/u-boot/u-boot/-/archive/${COMMMIT}/u-boot-${COMMMIT}.tar.gz -> u-boot-${PV}.tar.gz
+	https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git/snapshot/trusted-firmware-a-${FIRMWAREVERSION}.tar.gz
+"
+
+S="${WORKDIR}/${MY_P}"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~arm64"
+IUSE="envtools"
+
+
+RDEPEND="dev-libs/openssl:="
+DEPEND="${RDEPEND}"
+BDEPEND="
+	sys-apps/dtc
+	sys-devel/bison
+	sys-devel/flex
+	virtual/pkgconfig
+	sys-devel/crossdev
+"
+
+src_prepare() {
+	default
+		
+	sed -i 's:\bpkg-config\b:${PKG_CONFIG}:g' \
+		scripts/kconfig/{g,m,n,q}conf-cfg.sh \
+		scripts/kconfig/Makefile \
+		tools/Makefile || die
+		
+		#Apply PinePhone Pro patches        
+	        eapply "${FILESDIR}"/1001-Correct-boot-order-to-be-USB-SD-eMMC.patch
+	        eapply "${FILESDIR}"/1002-rockchip-Add-initial-support-for-the-PinePhone-Pro.patch
+	        #eapply "${FILESDIR}"/1003-Configure-USB-power-settings-for-PinePhone-Pro.patch
+	        eapply "${FILESDIR}"/1004-mtd-spi-nor-ids-Add-GigaDevice-GD25LQ128E-entry.patch
+	        eapply "${FILESDIR}"/1005-Reconfigure-GPIO4_D3-as-input-on-PinePhone-Pro.patch
+	        eapply "${FILESDIR}"/2001-mmc-sdhci-allow-disabling-sdma-in-spl.patch
+	        eapply "${FILESDIR}"/3001-pinephone-pro-Remove-cargo-culted-iodomain-config.patch
+	        eapply "${FILESDIR}"/3002-pine64-pinephonePro-SPI-support.patch
+		}
+
+
+src_configure() {
+	tc-export AR BUILD_CC CC PKG_CONFIG
+}
+
+src_compile() {
+	unset CFLAGS CXXFLAGS CPPFLAGS LDFLAGS
+
+	cd ${WORKDIR}/trusted-firmware-a-${FIRMWAREVERSION}
+	emake "${myemakeargs[@]}" PLAT=rk3399
+	cp build/rk3399/release/bl31/bl31.elf ${S}
+	
+	cd ${S}
+	
+	# Unset a few KBUILD variables. Bug #540476
+	unset KBUILD_OUTPUT KBUILD_SRC
+
+	emake "${myemakeargs[@]}" pinephone-pro-rk3399_defconfig
+	
+	echo "CONFIG_IDENT_STRING=' Gentoo Linux'" >> .config
+	echo "CONFIG_BOOTDELAY'='0'" >> .config
+	echo "CONFIG_SPL_DM_SEQ_ALIAS='y'" >> .config
+	echo "CONFIG_SF_DEFAULT_BUS='1'" >> .config
+	echo "CONFIG_SPL_MMC_SDHCI_SDMA'='n'" >> .config
+	
+	emake "${myemakeargs[@]}" EXTRAVERSION=-${PKGREL}
+}
+
+src_test() { :; }
+
+src_install() {
+	insinto /boot/
+	doins ${S}/u-boot.itb
+
+	insinto /boot/
+	doins ${S}/idbloader.img
+		
+	cd tools || die
+
+	if ! use envtools; then
+		dobin bmp_logo dumpimage fdtgrep gen_eth_addr img2srec mkenvimage mkimage
+	fi
+
+	dobin env/fw_printenv
+
+	dosym fw_printenv /usr/bin/fw_setenv
+
+	insinto /etc
+	doins env/fw_env.config
+
+	doman ../doc/mkimage.1
+}
+
+pkg_postinst() {
+	einfo "In order to get the U-Boot to work you will need a crosscompiler for arm-none-eabi you can do this by running: crossdev --target arm-none-eabi (if not done allready) and then re-emerge this packages"
+	einfo "This U-Boot is only to be used for the PinePhone Pro."
+	einfo "After compiling a new Gentoo kernel, copy the resulting Image from /usr/src/linux/arch/arm64/boot/Image to the boot partition (replacing the existing Image)."	
+  	einfo "New version of U-Boot firmware can be flashed to your microSD card or eMMc module."
+  	einfo "You can do that by running:"
+  	einfo "# dd if=/boot/idbloader.img of=/dev/mmcblkX seek=64 conv=notrunc,fsync"
+	einfo "# dd if=/boot/u-boot.itb of=/dev/mmcblkX seek=16384 conv=notrunc,fsync"
+	einfo "Due to the Boot Priority for the PPP it is HIGHLY recommended to not put U-Boot on the eMMc because there is no easy way to recover is something went wrong."
+}